TEXKLIN® is now available for dry cleaning too!

TEXKLIN HC PRESPOT
Pre-cleaning booster in perchloroethylene.

TEXKLIN HC PRESPOT is a highly effective product for pretreatment of products before dry cleaning.

TEXKLIN HC PRESPOT:

1. It has pronounced detergent and stain-removing properties.;
2. effectively removes grease and oil impurities;
3. it affects the pollution of aquatic nature;
4. enhances the overall cleaning effect of the working solution at the pretreatment stage.

The main method of application:
Apply TEXKLIN HC PRESPOT to the contaminated areas using a brush.
Leave to act for 10-15 minutes, preventing the treated areas from drying out.
After exposure, load the products into a dry cleaning machine and clean according to a standard two-stage process using a comprehensive dry cleaning booster

It can be used in a diluted form.:
with water — up to a ratio of 1:2;
solvent — up to a ratio of 1:2.
Use the diluted solution only for products with proven processing resistance.

For long-standing contaminants, the exposure time should be increased to 20 minutes.
In case of extensive surface contamination, the product can be applied by spraying until it is evenly wetted.

Restrictions and precautions.
Do not use on delicate products that are sensitive to moisture and mechanical stress.
Before use, it is recommended to check the durability of the material in an inconspicuous area.
Do not allow the product to dry on the fabric during exposure.

To get more information, write to us at info@texcare.ru or call:

8 800 222 57 55 — free multi-channel long-distance number;
8 495 730 57 55 — multi-channel Moscow number;
8 926 209 57 55 — a convenient mobile number.