- Main
- About the company
- News
- Company News
Oxygen on the yellow spots.
31/08/2012
Yellowish spots on white things are familiar to everyone.
And not all of them can be removed during regular and even "enhanced" washing.
Sometimes the last option to safely remove such persistent contaminants is direct exposure to active oxygen, and in the highest possible concentration.
To prepare the working mixture, you will need:
mix one part of THAWED OXIDE + 2 parts of hot water with a spatula until a whitish liquid with an insoluble white precipitate forms.
After that, the mixture needs to be heated. To do this, you can use a microwave oven (warm-up time: 30 seconds at medium power), or a steam gun. This activates the regenerative nature of the bleach. It is very important not to overheat the working mixture – in this case, there will be a simultaneous release of active oxygen, and not where we need it.
Using a pipette, the mixture is applied in the right amount to the areas requiring bleaching and left to act. The oxygen released "directly on the stain" will ensure the maximum effect of oxygen bleaching, which is sufficient to remove most of these stains.
In the most difficult cases, you can use a paste based on the same oxygen solution. professional bleach THAWED OXY.
It is prepared in a similar way, but the mixture does not heat up immediately, but gradually.
For heating, you can use a distiller tank of a dry cleaning machine, or any hot surface, for example, a steam generator.
The ratio of water and THAWED OXY is determined by the consistency – it should correspond to thick sour cream.
The fewer undissolved bleach granules present, the better the result.
Good luck!
And not all of them can be removed during regular and even "enhanced" washing.
Sometimes the last option to safely remove such persistent contaminants is direct exposure to active oxygen, and in the highest possible concentration.
To prepare the working mixture, you will need:
- OTTALIN OXY;
- measuring cup;
- steam gun or microwave oven;
- pipette;
- a bone spatula.
mix one part of THAWED OXIDE + 2 parts of hot water with a spatula until a whitish liquid with an insoluble white precipitate forms.
After that, the mixture needs to be heated. To do this, you can use a microwave oven (warm-up time: 30 seconds at medium power), or a steam gun. This activates the regenerative nature of the bleach. It is very important not to overheat the working mixture – in this case, there will be a simultaneous release of active oxygen, and not where we need it.
Using a pipette, the mixture is applied in the right amount to the areas requiring bleaching and left to act. The oxygen released "directly on the stain" will ensure the maximum effect of oxygen bleaching, which is sufficient to remove most of these stains.
In the most difficult cases, you can use a paste based on the same oxygen solution. professional bleach THAWED OXY.
It is prepared in a similar way, but the mixture does not heat up immediately, but gradually.
For heating, you can use a distiller tank of a dry cleaning machine, or any hot surface, for example, a steam generator.
The ratio of water and THAWED OXY is determined by the consistency – it should correspond to thick sour cream.
The fewer undissolved bleach granules present, the better the result.
Good luck!
